RASA MONO is one of RSA’s most universal tube deburring machines. It has proved itself worldwide again and again, in all industry sectors and markets including engineering, aerospace and automotive. The free-wheel brush makes RASA MONO suitable for a wide range of applications with small and large diameters and even sheet metal edges.
RASA MONO guarantees reliable deburring of endfaces of tube, hollow sections, solid bar ends as well as sheet metal in steel, stainless steel and non-ferrous metals. Special requirements for the stainless steel fabricator includes a deburring brush to leave the edges nearly square for the TIG welder where no gaps are wanted to brushes for the aluminum industry for mill finish extrusion to anodised sections where no surface marks are wanted.
Guaranteed evenly deburred workpieces for the entire life of the deburring brush. The clearance between the high performance brush and workpiece rest is adjustable and compensates for brush wear.
RASA MONO is suitable for tubes and sections with diameters of up to 90 mm and lengths of 100 mm upwards. Available options are the short tube deburring KRV attachment for short lengths, or the sheet deburring attachment BLV for straight sheet edges. The installation of both these accessories and the changing of the brushes can be done in under 1 minute and without tools.
The deburring process is independent of the workpiece shape. By one roation of the workpiece against the brush, the tubes and hollow sections are deburred simultaneously on the inside and outside without secondary burr in just 3 seconds.
Advantages
Your time advantages:
- Simultaneously deburrs inner and outer edges
- Shortest set-up times
- Quick and easy deburring reduces assembly times of end products
Your quality advantages:
- No chipping of paint, chrome or powder coating on workpiece ends due to burrs
- High performance brushes ensure consistent results
- Evenly rounded edges
- No secondary burrs
- No risk of injuries
Advantages of different bristle types
- The type of the brush fill material is selected based on the deburring job. The brush can easily be changed as required, meaning the tool is always adapted precisely to the current workpiece properties and the desired results.
- Optimal deburring results
- Longer life of the tool
- Extremely short deburring time
Your cost advantages:
- High service life
- Optimal tools for minimal piece costs
- Reduced Quality Control issues
- Lower deburring costs
Specifications
Technical Specifications
| Input power | 2.6 / 3.2 kW |
| Speed | 1500 + 3000 rpm |
Workpiece data
| Materials | steel, stainless steel, non-ferrous |
| Lengths | 100 mm and up (optionally 35 mm and up) |
Workpiece shapes: round tubes, shaped sections, solid bar, (optionally sheet metal)
Diamete: up to 90 mm
Options
- Equipment for the deburring of short workpieces: Deburring device for workpiece lengths < 100 mm
- Equipment for the deburring of straight sheet edges: Deburring device for sheet metal
- Integrated dust and swarf collection
- lockable castors
- For mobility
SEND A MESSAGE
MOBILE DEMONSTRATION SERVICE
Nothing’s more convincing than first-hand experience. We will gladly allow you to test whether our deburring systems are suitable for your parts – free of charge and non-binding. Not only here on site in Telford but also at your factory site.
That’s precisely why we developed our mobile demonstration service, which will come to you. On board you will find brushes and deburring machines, which you can then test on your parts.
Schedule your appointment now by calling 01952 585183 or filling out the form below
