RSA Cutting Systems


Batch extrusion deburring

RASAMAT Automat Deburring Solutions

The RASAMAT Automat deburrs both workpiece faces simultaneously. The RASAMAT Automat is a feed-through system using a conveyor with output volumes of upto 1,800 pieces per hour possible. Workpiece sizes can be switched within seconds using automated parameters entered on the control console or by using the workpiece data copied from another machine, for example a saw. No other additional set-up is required.

Depending on volumes, it is possible for the RASAMAT Automat to pay for itself within 6 months. Investment costs are manageable, engineering costs for integrating it into the existing production low, and three-fold increases in production over a semi-automated solution are achievable.

The RASAMAT Automat is usually linked with an upstream separation system. Additional machining modules can also be connected after deburring, for example workpiece length measurement or online cleaning.



    Technical Specifications – Standard 

    Input power 1.8 / 2.4 kW
    Speed 1000 + 1500 rpm


    Workpiece data – Standard 

    Materials steel, stainless steel, aluminium, non-ferrous metals
    Cross-sections 10×10 to max. 180 mm h x 500 mm w
    Fixed lengths 60 to 3,000 mm