RSA Cutting Systems


For straight and bent tubes and simple and complex sections.
Thorough and quick deburring for symmetrical and asymmetrical workpieces

TURNAMAT Deburring Solutions

TURNAMAT is the tube deburring machine for an economic solution for deburring of straight and bent tubes, complex section shapes and workpieces which are heavy or have stronger burrs. Without manually turning the workpiece both the inside and outside edges can be simultaneously deburred in around three seconds. With manual workpiece feeding this means shorter set-up times! The Turnamat is also engineered to be a heavy, solid, long – lasting unit giving many years of trouble free service.

In addition to the typical rotation the radial brush also performs a second rotation: the entire drive unit also rotates to ensure the inner and outer edges of the workpiece are deburred evenly.

TURNAMAT symmetrical workpieces can be changed to a different workpiece diameter via an adjustment control within seconds. The machine has a high safety standard with CE certification. Asymmetrical workpieces can be safely deburred on the TURNAMAT. Work pieces are fed through a finely engineered front plate which can easily be changed without tools.


Your time advantages:

  • Simultaneously deburrs inner and outer edges
  • No manually turning the workpiece
  • Brush change in under two minutes


Your quality advantage:

  • High performance brushes ensure consistent results
  • Residue-free deburring even on larger cross-sections


Your cost advantages:

  • Time saving
  • Built-in drawer for swarf and debris collection
  • Short ROI – less than 12 months



Technical Specifications

Input power 4.0 / 5.0 kW
Speed 1500 + 3000 rpm


Workpiece data – Standard TURNAMAT 1 + 2

Materials steel, stainless steel, aluminium, non-ferrous metals
Turnamat 1: 20 x 20 to 120 x 120 mm, 10 x 10 to 120 x 120 mm
Deburring time 1 to 5 seconds per end face


  • Changeable front plate for precise alignment of asymmetrical workpieces
  • Clamping and transverse feeding device for workpiece cross-sections to 70 x 450 mm
  • External dust extraction
  • Lockable castors for mobility



    Nothing’s more convincing than first-hand experience. We will gladly allow you to test whether our deburring systems are suitable for your parts – free of charge and non-binding. Not only here on site in Telford but also at your factory site.

    That’s precisely why we developed our mobile demonstration service, which will come to you. On board you will find brushes and deburring machines, which you can then test on your parts.

    Schedule your appointment now by calling 01952 585183 or filling out the form below