RASAMAX DUO sheet metal deburring machine was developed specifically for quickly and reliably deburring straight sheet metal edges. The deburring machine features two counter-rotating deburring brushes on two offset heights. Using this concept the top and lower edge of the sheet are deburred simultaneously in just one cycle. That means up to 50 % time savings compared to other methods!
The workpiece is simply placed on the roller table and guided along the lay-on edge and the high performance brushes. Razor-sharp sheet edges – e.g. caused by punching – are safely rounded off within seconds. Yet it causes no secondary burrs or material removal.
The use of plastic bonded high performance brushes allows straight sheet edges to be deburred without marking the surface. These brushes are developed for punch, laser and guillotined cuts leaving the edges completely smooth with no surface marks.
RASAMAX DUO is suitable for deburring single pieces and small batches, and the robust construction is designed for continuous operation.
Advantages
Your time advantages:
- Very short deburring times of a few seconds. eg 1m stainless in approximately 3 seconds
- Set-up via hand wheel
- No manual reworking
- Quick and easy deburring reduces assembly times of end products
Your quality advantages:
- Consistent deburring results, regardless of user
- Evenly rounded edges without secondary burrs
- Improved assembly properties
- More precise end product
Your cost advantage:
- Time saving, whole edge deburred corner to corner in one pass
- High service life
- Optimal tools for minimal piece costs
- Quick return on investment
Specifications
Technical Specifications
| Input power | 2.6 / 3.1 kW |
| Speed | 1500 + 3000 rpm |
Brush diameter: 250 mm
Workpiece data
| Materials | steel, stainless steel, non-ferrous metals |
| Thickness of sheet metal | up to 5 mm |
Options
- External dust extraction
- Lockable castors for mobility
SEND A MESSAGE
Fill the form in below and someone from RSA will get back to you shortly.
Thank you.
MOBILE DEMONSTRATION SERVICE
Nothing’s more convincing than first-hand experience. We will gladly allow you to test whether our deburring systems are suitable for your parts – free of charge and non-binding. Not only here on site in Telford but also at your factory site.
That’s precisely why we developed our mobile demonstration service, which will come to you. On board you will find brushes and deburring machines, which you can then test on your parts.
Schedule your appointment now by calling 01952 585183 or filling out the form below
